Take A Hike Keychain

thingiverse

Bring adventure and the outdoors with you wherever you go with this Take a Hike Keychain! This can be printed in multi-colour without any upgrades using a single nozzle (no multi-material or Palette Pro needed!). I've uploaded .GCODE files for PLA which can be used directly, or download all .STL files and slice them yourself. PRINTING INSTRUCTIONS: This design is meant to be printed using the First Layer Inlay method which can be done with any printer, no upgrades needed. The following youtube video and article show examples of this method: Youtube video from Make Anything: https://www.youtube.com/watch?v=KV2AjyowXX4&t=1041s Article: https://www.alexwhittemore.com/first-layer-multi-material-on-an-unmodified-single-extruder-printer/ SLICING INSTRUCTIONS Bring all .STL files into your preferred slicer, lay them down, and line up the thin pieces exactly with the main body pieces. Then, delete the main pieces and save only the thin pieces as one .GCODE file. Save an additional .GCODE file with only the thick main body pieces. - Print the thin pieces first - When this print ends, don't remove them from the print bed. - Swap filament to another colour, then select the thick pieces file to print over top of the thin pieces - If they are lined up properly the thin pieces will fit exactly into the small holes in the main thick pieces, creating a cool seamless colourful layer.