Tag Collar
thingiverse
Work in Progress ================ Disclaimer: This project may never work, may ruin your day trying to get it going, or be damaged by water or an angry animal. No warranties of any kind are provided. Stay safe when dealing with animals, regardless of their size. GPS Tracker for Wildlife ================-------- This is a prototype GPS tracker using the SmartOne GPS for wildlife conservation purposes. There are two models: 1. Standalone adapter to place the GPS receiver/satcomm as is on top of a typical collar. 2. Solar adapter that takes the internals of the GPS receiver, adds solar panels and a LiPo battery into a new case adapted for collars at least 50mm wide and 150mm diameter. Materials ========== 1. Panels 43x34x2mm 5V 0.2W - Polycrystalline Mini Solar Panel Photovoltaic Panel. 2. Charger 23x15.4x5.7mm - Mobile Power DIY Board, Charger, and Step-Up DC Converter Module for 37V 18650 Lithium Battery. 3. LiPo batteries (some Samsung Galaxy S2/S5 or similar mass-produced). Building Instructions ===================== 1. Use the Customizer to change the collar diameter or bolt positions. 2. Take the generated STL file and import it into your favorite slicer (e.g., Cura) for your 3D printer, or send the file to a large 3D printing provider (e.g., Shapeways, 3D Hub).
With this file you will be able to print Tag Collar with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Tag Collar.