Tablet / Smartphone universal wall mount

myminifactory

I needed some desk holder for my Huion 420 graphic tablet so I designed one. During the modeling process, I thought about making it fit any tablet or smartphone size, so I split it in half to make it universal. The holders have a drawing pen holder on the right side, and the hole on top is 16.5mm in diameter, so it can hold any pen with a maximum diameter of 16.5mm. It also has a little hole at the bottom for the pen tip. On the left side, there's a little hook to put the cables. I didn't make it too high to follow the lines of the holder. The measurements of the holder are as follows: the part inside is 10mm wide, so you can put a tablet or smartphone with this size inside it. It's 44mm long and 75mm tall. Each side has two holes for screws, with a diameter of 2.8mm and a little chamfer on top to fit larger head screws. I also included two models without the cable hook and the pen holder if you don't need them to hold your smartphone and tablets. I didn't put any cable holes in it, like for charging or connecting the audio jack, because every phone or tablet has its connector in a different place, so it would be impossible. But you can drill a little hole where you have it to charge it or listen to music while docked. I attached it to my desk, but you can use it on a wall as well, just pre-drill the holes for the screws and then place it on the wall and enjoy! If you have any suggestions for upgrades, additions, or comments, please leave them below. Let me know if you like it, if you print one yourself (maybe upload a photo, I'll really appreciate it!), and also consider checking out my other stuff on my profile. I'm still learning how to model things, but I have lots of ideas and I'll upload them soon! If you want to make a tip to me, I will really appreciate it, and I'll think about continuing to make this stuff because I'll know that someone likes my design!