Tablet / phone stand

prusaprinters

<p>The stand is designed to support a tablet or phone with a cover. It's quite tall to support the tablet well, but doesn't need much plastic. The dimensions of the stand maintain the proportions that have already been practically proven during the long use of another stand from bent Plexiglas.</p><p>Nominal, maximal thickness of supported device: 11.4mm (variant A). If your device is thicker, you can scale the supplied model.</p><p>Print settings:</p><ul><li>Layer height: 0.2 mm,</li><li>Perimeters: 4,</li><li>Solid layers - top/bottom: 5 / 5,</li><li>Infill: 25 %,</li><li>Supports: No.</li></ul><p>The stand on the photo (variant A) was printed from PLA without Brim - the model started to separate from the bed on one end, but still it was finished with small defect only. Next time I would use Brim.<br>&nbsp;</p><p>Variants:</p><ul><li>A - maximal thickness of supported device: 11.4mm (.stl, .3mf, .gcode);</li><li>B - maximal thickness of supported device: 9.4mm (.stl).</li></ul>