TABLE SAW PUSHER

thingiverse

SAW PUSHER UNTESTED! UPDATE September 7th, 2019 - For those printing the tracks separately from the legs...new sets of tracks are available, offset inside by 0.2mm and at the end by 0.1mm. For those struggling with TPU, check my print settings in CURA. Print Bed: Print on glass with a solution of PVA (white glue). The print is great, using generic filament! Filament was dried to 70 Celsius degrees for two hours prior printing! See Mini Pusher Tracks Print https://www.thingiverse.com/thing:3812899 Those printing in dual mode... I do not know what settings to use to make the parts... Currently, I design the parts printed in dual mode - with "0" tolerance. If anyone needs parts for dual print heads... just let me know what settings are used for two parts printed together. Pads come with a DUAL FILAMENT PRINT OPTION. If your printer can do it, however as an alternative, rubber tracks can be printed separately from the pads. For those printing with Elastic Filament - keep in mind that TPU filament is hydrophilic, and the quality of the same filament after 10 hours of printing can be different at the end of the print; if the printing environment is humid! I strongly recommend checking out my Filament Enclosure: https://www.thingiverse.com/thing:3172206/files For those not able to print rubber/elastic fillament, see track version where 0.8 -1.2mm rubber sheet can be used and secured with pins. 3.0 and 3.2 pins are provided. Bolts /nuts used for this application: M8 X 25mm M4 X 30mm Disclaimer: Print and use this part at your own risk! Always follow the safety procedures for your table saw. Design to print with support! by COSTA!