Table Pen Holder

prusaprinters

<p><strong>Update: improved the mount with a better thread. Also the screw is now bigger and better, allow to mount on table from 0 to 25mm thickness. In the file with the number “2”.</strong></p><p>&nbsp;</p><p>Little bucket for mounting on tobales with a thickness of 10 - 25mm.</p><p>Total hight of 85mm; depth of 80mm; outer diameter 60mm and inner 55mm.</p><p>The moutn will be fitted in the bucket and tighten to the table with the screw. Dont overtight the screw!</p><p>The measurements are pretty tight, so I recommend printing in 0,2 layers and even then a few little adjustments with a file or sandpaper could be needed.</p><p>&nbsp;</p><p>The model in the pics were printed in 0,4 layers and nedded adjustments to fit properly and even after it was pretty tight and cracked a bit of the bucket, but still able to use.</p><p>So, have fun printing it, play a bit with the slicer and show you makes :)</p><p>&nbsp;</p><p>&nbsp;</p><p><strong>Note: </strong><i>the mount + screw can also be used with my “Remote-Table-Mount” ( </i><a href="https://www.printables.com/de/model/310694-remote-table-mount"><i>https://www.printables.com/de/model/310694-remote-table-mount</i></a><i> ) and/or with my "Table Can Holder V2 ( </i><a href="https://www.printables.com/de/model/289959-table-can-holder-v2"><i>https://www.printables.com/de/model/289959-table-can-holder-v2</i></a><i> ).</i></p>