T3 Lite Compact - Recoil Pad

thingiverse

Here is the spun text: Replace Stock Recoil Pad with a Printed Backer Print the Backer using PLA, ABS, or PC materials. However, for the PAD, use Urethane as the material and set the fill density to 35% for optimal recoil properties. You can adjust this percentage later if needed. Wall Thickness should start at 2mm and can be adjusted as necessary to achieve desired properties. Scaling is required when using spacers with the stock. Keep in mind that using a stock taper will result in a larger size. Print Settings: Raft: None Supports: Not Required Resolution: Set to the highest possible level. Infill: Check Notes for Recommendations