T-Slot Guide (Bosch GTS 10) Long Version

thingiverse

See original: https://www.thingiverse.com/thing:3079861 You can customize this model: Parameter Description Every value is provided in millimeters (mm) Length (default 200) The complete length of the whole piece. Cut Hole Width (default 6) The diameter of every hole - in the center of the cutaways. Cut Length (default 15) The length of the cutaways. Width Bottom (default 20.5) The width of the lower part - for the t-nut. Width Nose (default 16) The width of the upper part. Height Nose (default 3) The height of the upper part. Height (default 3.5) The height of lower part - for the t-nut. Cut Distances Cut Distances is a list of all cutaways. For each value named in this list, is a cutaway and a hole in the center of the cutaway provided. The preset values Cut Distance1 up to Cut Distance4 are calculated as follows: Cut Distance1 = length / 9 * 1 Cut Distance2 = length / 9 * 3 Cut Distance3 = length / 9 * 6 Cut Distance4 = length / 9 * 8 For example: you can use the cutting distances [20,180] to end up with a cutaway after 20mm and 180mm. $fn=50 is the resolution. How many lines will be created for the hole. Example given: $fn=8 creates a hole with 6 sides for a hexagon screw. Have fun