T-Rex Nativity
cults3d
Peaceful manger scene or two T-rex fighting over a table saw? There was a meme going around last year that claimed it was an optical illusion... you'd either see the Nativity scene or two tyrannosaurus fighting over a table saw (or melon). I've removed the illusion. There is a small hole in the star to facilitate hanging as an ornament. I don't recommend printing at 100% (or a 0.6mm nozzle), as the left T-Rex's hands won't print. My multi-colored example was printed at 200%. My next print will be 250% or 300%. My print settings: Layer height 0.2mm Initial layer height 0.3mm Infill 30% (15% would probably be sufficient as well). For multi-color printing Cura has a plug-in available to facilitate a "filament change" at specific layer heights. Z scaled at 100% Color start: brown/red (T rex) Change color at layer: 3 : brown/gold (basket) Change color at layer: 4 : silver Change color at layer: 5 : White (shelter and ground) (Optional) Embossed text will be the layer 4 color. (Optional) Raised text do an additional color change at layer: 7 Z scaled at 200% Color start: brown/red (T rex) Change color at layer: 6 : gold (basket) Change color at layer: 8 : silver Change color at layer: 10 : White (shelter and ground) (Optional) Embossed text will be the layer 8 color. (Optional) Raised text do an additional color change at layer: 13 Note, with 0.6mm nozzle this took 20 minutes or so to print, at 5 grams. You may need to enable "Print Thin Walls" if printing the raised text at 200% or below. If using a different scale or using other print settings, than use the preview option in your slicer to find the correct layers. Update November 13th, 2023 - Added a Bambu/Orca 3MF or a 5 color door topper version.
With this file you will be able to print T-Rex Nativity with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on T-Rex Nativity.