T-Handle SAE Hex Key Set Organizer

prusaprinters

This was remixed from the excellent design by jhiggins (https://www.printables.com/model/89597-t-handle-sae-mm-hex-key-set-organizer) to include additional wrench sizes. It fits a standard pegboard with 1" spacing.It includes provisions for sizes 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, ¼, 5/16, 3/8. It also orients the T-Handles with the Hex points up, which positions my T-Handles vertically.Hardware Required:NonePrint BOM:1 x t-hex_organizer_sae_modifiedPrint Parameters:Material: PLA, PETG, ABS, etc.Recommended Settings: Primary Settings: 0.6 mm Nozzle, 0.3 mm Slice Height, 5 Bottom, Top, and External Perimeters, 30% or greater infill.I'm sure you could print this part with a 0.4 mm Nozzle and 0.2 mm Slice Height, but I haven't done so.Supports: Support on Build Plate OnlyThe pegs that fit into the peg board are bridges. If you do Support on Build Plate Only it will fully support the bottom peg and support the top peg enough to bridge.