
Switch guard for portable inflating pump
prusaprinters
<p>I bought this great Alps inflatable bed for camping and for guest use. The problem is that the switch comes on too easily if something bumps into it during transport. Then you arrive at your destination with dead batteries in your pump or a burned out pump. I created this ring to lock onto the pump and prevent the switch from turning off. It has a button that holds firmly in the power port to keep the ring in place. Then it covers half the switch to make it impossible to turn on until you remove the ring.</p> <h3>Print instructions</h3><p><strong>Printer Brand:</strong> Prusa<br/> <strong>Printer:</strong> I3 MK3S<br/> <strong>Rafts:</strong> No<br/> <strong>Supports:</strong> No<br/> <strong>Resolution:</strong> 0.2 mm<br/> <strong>Infill:</strong> 30%<br/> <strong>Filament:</strong> Prusament PETG Orange<br/> <strong>Notes:</strong></p> <p>It has one built-in support below the catch button that needs to be removed with a knife or pliers before use. No slicer-generated supports are needed.</p>
With this file you will be able to print Switch guard for portable inflating pump with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Switch guard for portable inflating pump.