Switch Card Holder

prusaprinters

<p>Simple 3x5 (15 games) holder that fits nicely inside the travel case. =) The game cartridges stay confidently in the frame, but you can easily pop them out too. If this is not the case for you, then use the step file to adjust the tolerances for your printer. I printed this on 2 different MK3S's, one a good 2 years older than the other, so, it seems great for a Prusa i3 MK3*.</p><p>I'm also including a 1x1 STL for this (and, you can just enable it in the slicer file too, it is currently there but hidden). I print that first to ensure that the tolerances are correct and everything fits correctly before printing the larger, 3x5.</p><p>The print is using the 0.15mm layer height, which is recommended in order to get the tiny little tabs that hold the games in correctly.</p><p>I'm also including the original model files from Fusion 360 in STEP format in case you'd like to make a different configuration, or you need to tweak the tolerances for your printer.</p>