Swing seat canopy adjuster

thingiverse

A swing seat canopy adjuster I made for a friend. The original part broke for him, so I designed this one instead. The dimensions of the connecting faces are based on the original one, but the rest has been optimized for 3D printing. There are a couple of things that has to be done after printing the parts: Part1: - Remove the sacrificial layer from the screw holes. Their only purpose is to make this part printable without support. Part2: - Remove the small tabs on the outside under the edges with a blade. Their only purpose is to make this part printable without support. - Insert a "Sleeve Converter Nut" to the hole --> OD: 14mm, ID: 10mm, Length: 20mm max (e.g.: shorturl.at/iqOW8) - Note: The side holes that can be seen on the pictures have been removed from the design. They were not necessary, the piece was a tight fit in the swing seat frame anyways. Star_knob: - Remove the sacrificial layer from the screw hole. It's only purpose is to make this part printable without support. - Insert an M10x50 hex head screw (DIN 933) to the hole. It should be a press-fit. Feel free to remix this design, the STEP files are available in the downloads. If you like my work and would like to support me, please feel free to invite me for a coffee on the following link: https://www.revolut.me/dnielch22 Donations are optional, but your help is always highly appreciated and it enables me to invest in future projects and builds! Have a nice day and happy printing!