Swiffer WetJet Replacement Handle

thingiverse

As probably many of you have gone trough - our Swiffer WetJet handle broke and I decided to try crafting a new one instead dumping the thing and buying a new one. Less plastics to landfill + money saved = winner :) The handle is design focuses on two main things - sturdiness and printability. Due to the oval shape of the handle and the switch position, supports from build plate + enforcer inside the switch hole would be recommended. These are easy to remove. Just make sure you don't overdo the enforcer to let it “spill” inside the handle which will make it more difficult to remove. To wire the switch - you will have to de-solder it from the wires and fish them trough the hole then re-solder them. As of hardware needed - 2x 2.5mm self tapping screws with length between 12 and 16mm to hold the switch in place and 2x M6 bolts with length between 6mm and 20mm to hold the handle in place on the aluminum tube. The handle is not as comfortable as the original one, but making those curves would hurt printability big time, I decided it is not worth it. If you like my work - you can [buy me a coffee](https://www.paypal.com/donate/?business=435DBMDTVP3XW&no_recurring=0¤cy_code=CAD) :)