Swappable Text Mini Floor Sign

thingiverse

I LOVE the design of Muzz64's sign and also that more and more signs have been added but I didn't want to have to print a new sign for each set of texts. SO, I made some tweaks and present The Swappable Text Mini Floor Sign! This might be a bit more "involved" than Muzz64's but I think ultimately it frees makers up to do quicker prints as you don't have to make a whole new sign when you want to have some more funny text! There are a few files in here for users to have some variations. Single Colour Printing: =========== Sign: Either use the Sign_2MatPrint_DefineInSlicer.STL into your slicer and define a second material at the bottom of the U bracket on the top of the sign or simply swap it out with another sign. Swappable Text Area: Bring _sign_Define2MatsInSlicer.stl into a 3D software, create your text on the sign, export it to an STL file and then bring that new file into the slicer. Define your second material when the text starts appearing or pause your print and redefine in your slicer. MMU Prints: ========== Sign_MMU_Print.3mf: This should be set up so the "edge" around the lettered area will be a different colour than the main body of the sign. To create the Swappable part for mmu prints, I recommend taking the _slideInBase.stl and the _slideTop.stl into a 3D program. They should come in at the correct placement. Create your own text on top and export it to an STL file. Go into your slicer and bring in all three pieces (slideInBase, slideTop and your text) and define the slideTop and Text as the same material. I hope everyone enjoys this and that we can all save a ton of time/material and be able to make tons of signs!