SW-X1 Fan Shroud V2

thingiverse

Moving my designs off Thingiverse, files can be found here: https://www.prusaprinters.org/prints/22309-sw-x1-fan-shroud-v2 New design of the Artillery Sidewinder X1 fan shroud. It was designed from a Prusa MK3s Bondtech BMG fan shroud with Joel Nicklasson's fan bracket, but modified to mount to the original fan mounting location. This shroud sits close to the heat block and would be best printed with a higher temperature material such as ABS. It is designed to print with the shroud bottom on the build plate. It has been printable for me with just one support as shown in the picture. Depending on your printer/settings, more may be necessary. This is designed to hold the stock parts fan with the intake in the upward direction, but the wires for the stock fan will be too short and will need extending. To extend wiring or use a new fan with longer wire: 1) 3mm x 6mm Socket cap screws 1) 3mm x 8mm Socket cap screws 2) 3mm x 28mm Socket cap screws 2) 3mm nylok nuts