Svanen - hand launched free flight glider

cults3d

READ CAREFULLY! PLA+ or LW-PLA filament strongly recommended. 100% scale: 0.4 mm nozzle and printing line width (slicer setting) 0.25 mm layer height 1 perimeter/shell/wall 2 bottom layers 0 top layers 0% infill Use as high temperature as possible for good layer adhesion (ca 220C-230C for PLA). Place seam at the trailing edge of the wing parts, and at the bottom of or internally on the body parts. The parts can be printed separately or all at once. Placement on bed as illustrated. Finished weight should be about 126g for PLA (affected by printing line width!). The parts can be scaled, but you then also have to scale printing widht and layer height (i.e. 75% scale: 0.3 mm printing width, 0.19 mm layer height).