Suzuki SJ 410 Body / Karosserie 1/9 SCX10 Chassis

thingiverse

This Suzuki SJ410 body is roughly 1:9 scale and fits an Axial SCX10 or RC4WD Gelände 2 chassis, along with any other rails measuring 415mm in length. The wheelbase comes in at approximately 275mm. All components need to be glued together or can be screwed into place. I personally used Ruderer L530 glue, which dissolves the parts that are meant to bond and provides a solid connection. Most of the body parts are printed using PLA laid flat on the heatbed, resulting in more parts but easier printing overall. The transparent parts for the lights are made from PETG, while the windows are crafted from 1mm Makrolon Polycarbonate. When utilizing the ironing function within Cura, be cautious of the top surface due to some non-symmetrical parts. I printed my parts with a layer height of 0.16mm. To print these components, you must scale them down to 10% of their original size. Essentially, the body is complete, but some interior elements are missing because the chassis has yet to be finished and the planned 3Racing exReal Chassis hasn't arrived yet. Due to delivery issues, I've opted for a SCX10 frame with leaf springs and a self-made front motor mount instead. To stay informed about new or additional parts, use the watch function. Update: On October 13th, 2019, Mr. Vein created some cool additional interior components that you can find here: https://www.thingiverse.com/thing:3908802 Update: On May 14th, 2019, I added a floor for the passenger cabin, firewall, and connector to the cargo floor. Update: On February 19th, 2019, I created a small closed cabin similar to the Jeep Brute; two versions are available: a) A two-part version for new prints b) One part if you've already printed the body (addon) Update: On April 2nd, 2019, I uploaded new pictures. Update: On September 14th, 2018, I translated the STL list from German to English. Update: On July 10th, 2018, I added a tire, rim, and axle; however, it's not functional at this time. Update: On June 13th, 2018, I designed a soft top that hasn't been printed yet. Update: On June 12th, 2018, I added an outside mirror. For those looking to set up a leaf spring system with Axial SCX10 rails, I've created some mounts and leafsprings that fit underneath the body. You can find these components here: https://www.thingiverse.com/thing:2956547 If you're planning on using a front motor mount with an HSP gearbox, check out this thing: https://www.thingiverse.com/thing:3039759 As for center plates (for different transmissions), use this thing: https://www.thingiverse.com/thing:3040630 If you want to create a long version of the body (wheelbase 310mm), consider using my Long Bed design here: https://www.thingiverse.com/thing:3100783