Support ring to fix and plug PTFE tube if filament (Ø1,75mm) is not in use
prusaprinters
Support ring fit to fittings with a hexagon of 13mm and could be removed to take filament or to add filament and tube to the bores of the support ring.Added filament and tube is clamped in supporting ring and connection is air tight. Tube could be orientated in steps of 30° by putting the ring to the nut.With clamped end of filament you never would have the issue, that end of filament is inside the tube and you have to open the filament box.Part is printed with flexible filament (Ninjaflex 85A) and is printed without support.For a suitable fitting, follow the link: Fitting to mount a PTFE tube to filament box von H3dSprint | Kostenloses STL-Modell herunterladen | Printables.com
With this file you will be able to print Support ring to fix and plug PTFE tube if filament (Ø1,75mm) is not in use with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Support ring to fix and plug PTFE tube if filament (Ø1,75mm) is not in use.