Support Raspberry et outils pour Tevo Tornado

thingiverse

This support is made up of a detachable box for a Raspberry Pi3B+ (Octoprint), a rack to hold the tools that come with the Tornado (flat screwdriver, alen keys and flat key) and a tray to store various tools (cutter, ruler, etc.). This bracket attaches to the V-Slot profile of the printer. It's an assembly of these three parts available on Thingiverse: * Raspberry Pi 3 (B/B+), Pi 2 B, and Pi 1 B+ case with VESA mounts and more (https://www.thingiverse.com/thing:922740) * Raspberry Pi + Tool + Camera for CR10/Tevo Tornado (https://www.thingiverse.com/thing:2841777) * Tools holder for Tevo Tornado / Creality CR10 (https://www.thingiverse.com/thing:2872244) The changes I made to the parts: * Raspberry Pi 3 (B/B+), Pi 2 B, and Pi 1 B+ case with VESA mounts and more: I removed the external mounting brackets, added three holes inside to attach the box to the bracket, added ventilation holes on the sides and changed the ventilation symbol. * Raspberry Pi + Tool + Camera for CR10/Tevo Tornado: I removed the Raspberry box (because I wanted it to be detachable), added a surface underneath to attach the Raspberry box, added holes in ventilation for the Raspberry box, added a stop at the top to position the Raspberry box, added clearance for easy access to the Raspberry micro-SDCard, adjusted the height so that the bottom of the Raspberry box is 5mm from the table, and adjusted the position of the tool rack so that you can put the tool tray. * Tools holder for Tevo Tornado / Creality CR10: I did not change anything on the tray but I modified the bracket to place the edge of the tray 5mm from the bed adjustment wheel. To attach the different pieces together, I used: * 6 screws M3x6mm * 3 screws M3x8mm + nuts + washers * 2 screws M3x10mm * 4 screws M3x16mm * 3 M3 nuts * 3 washers diam 3mm If you printed my support, do not hesitate to put your photos.