Support pour Adaptateur câble d'extension carte MicroSD vers SD, et autre support pour Micro SD vers MicroSD pour CR-10S

thingiverse

Bonjour, I recently discovered that using the microSD card in my CR-10S was not practical and I was worried that the MicroSD connector would wear out over time. So, I decided to use a standard SD card instead. I purchased an adapter on Amazon that converts the MicroSD cable to a standard SD cable (https://www.amazon.com/dp/B07D9J2NK1/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1&tag=tv-auto-20) but soon realized it was not practical and would hang loose in the air. I then came up with the idea of creating a holder that attaches to the existing screws on the controller side. Now, I can use my SD card in the holder and it's very convenient. I designed it using Fusion 360 and printed it with PLA. I also created a model for an extension cable from MicroSD to MicroSD for those who still want to use the MicroSD card. My Cura settings are as follows: temperature of the nozzle at 205 degrees, bed temperature at 60 degrees, fill density at 20%, layer height at 0.2 mm, wall thickness at 1.2 mm, top/bottom thickness at 0.8 mm, and "Part Everywhere" support generation with a Z-distance of 0.2 mm and X/Y distance of 0.7 mm. The bed adhesion is set to "Border". I want to warn that my cooling system keeps the controller completely cool and the adapter does not overheat or deform. However, I do not recommend attaching this adapter to the controller if it gets hot!