Support for Weber iGrill2 on Weber Grill

prusaprinters

<p>I have a weber "Master Touch" Grill and a iGrill2 thermometer.<br>The problem is where to place the thermometer during grilling. It has a magnetic base, but you cannot stuck it to the kettle, it is too hot.<br>So I designed and printed a small mounting plate that clamps on the front leg of the grill.<br>I used the little metal disc that was supplied with the thermometer.</p><p>I uploaded a new (version 2a). This one has a better grip on the leg of the Grill.</p><p>I added the Prusa slicer file for PETG.&nbsp;<br>I hope that with PETG it will be better temp resistant then with PLA, and will not slide down when the sun is shining on the mounting plate.</p><h3>&nbsp;</h3><h3>Print Settings</h3><p><strong>Printer:</strong> DaVinci Mini w</p><p><strong>Rafts:</strong> No</p><p><strong>Supports:</strong> Yes</p><p><strong>Resolution:</strong> 0.3</p><p><strong>Infill:</strong> 20%</p><p><strong>Notes:</strong><br>The supports are needed for the "cut out" for the metal plate.<br>The cut out is for indicating the right place to stick the metal disc.</p><p>I printed it with PLA, but on hot summer days the plastic gets a bit weak and the thermometer slides down. I corrected this by applying rubber cement on the inside of the clamp.<br>Probably it is better to print it with ABS or PETG.</p><h3>How I Designed This</h3><p>Designed with Tinkercad</p>