support coulissant pour laser 3dpburner

pinshape

This is an add-on for the 3DPBurner original files, allowing you to set your laser level without unscrewing it. It works with any laser but is optimized for a 2000mw laser available on AliExpress: https://www.aliexpress.com/item/New-arrival-High-Power-12V-2W-2000mW-Focusable-Blue-Laser-Module-445nm-450nm-with-TTL-Wood/32439376930.html?spm=2114.10010108.1000014.5.Lncq9m&scm=1007.13338.46329.0&pvid=433444d2-69b2-4907-b390-25fc758f3628&tpp=1 To use this add-on, you will need a 63mm axis that is long and has a 3mm diameter, as well as the following screws: one 20x3 mm screw, one 3mm nut, and four 12x3 mm screws. Optionally, you may also want two screws to block gears on the axis. The cable guide part can be simply inserted onto the fan. If you use the X-axis switch, however, you will need to compensate for it since the laser in low position may touch the arm of the X-axis and prevent the switch from working properly. Print Settings: Printer Brand: RepRap Printer: Hephestos Prusa I3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2