SuperGameGirl (credit to Cristov9000)

thingiverse

I wanted to showcase Cristov9000's SuperGameGirl project by printing and sharing my print. All credit goes to Cristov9000, who generously made the files available on his Github Project. For a mere $100, I could have bought a high-quality print from someone else, but I opted for a $300 printer with shipping costs included, allowing me to tackle this ambitious project myself. As a seasoned 3D printing enthusiast, I was confident in my ability to produce workable parts after successfully completing the first three prints. The following components were printed: one Back case, one Front case, the PiBracket, and two sets of Shoulder Button models each. The print settings used are listed below: **Print Settings** I used a Monoprice Maker Select v 2.1 printer to produce these parts. * Rafts: No * Supports: Yes * Infill: 100% * Notes: Printed with Hatchbox 1.75mm White PLA Filament The print settings were as follows: * Layer height: .08 * Shell thickness: 1.2 * Bottom/Top thickness: 1.2 * Fill Density: 100% * Print speed: 50 * Printing temperature: 210 * Bed temperature: 60 * Support type: Touching buildplate * Support fill percent: 20 * Filament diameter: 1.75 * Flow: 100 * Nozzle size: .4 * Retraction speed: 25 * Retraction distance: 2 * Initial layer thickness: .3 * Initial layer line width: 125 * Travel speed: 90 * Bottom layer speed: 15 * Outer shell speed: 20