Super X 125mm FPV racer conversion kit

thingiverse

Released] V2.2 frame, big change to compensate resonance in the frame, needs 2XM2 screw. [BETA] : For those with older SuperX frame (arm and plate in one piece) I've made the V2.2 base frame with arms and screws. But untested feel free to give some feedback. After many weeks of testing, here's the V1.2 Fpv racer printable kit to convert your super-X 125mm into a stunning fpv racer. Great agility, and lots of fun! The frame has been designed for Fpv racing. The flat bottom and shape allow you to make sharp turns without yawing, making the quad behave like a plane when getting speed. Compatible with stock lipo batteries for five minutes of racing. Also compatible with 350mah to 750mah nanotech ultra-flat lipo packs. The Camera pod is designed for one-gram cameras that can be found at http://fpvhobby.com/83-1-gram-nano-camera.html, or many other places on the web. Video TX is this one: http://www.fpvhobby.com/229-new-mini-58-ghz-avtx-for-fatshark-.html, but compatible with any same form factor emiter. Since we're using a one-s battery pack, you need a five-volt step-up converter that can be found anywhere on the web. With the 350 nanotech batt, the complete quad weighs 63 grams. Instructions Demo video: https://youtu.be/yXwBG_ORxpY Another One: https://www.youtube.com/watch?v=amVn4RQ_yHo To assemble the V1 Frame: * Use FPV-SX-Upper-Frame * Use FPV-SX-Base-Frame * Use FPV-SX-Cam-Pod * Use FPV-SX-RollBar or FPV-SX-RollBar V2.2 This setup weighs only 52 grams. To assemble the V2.2 Stronger Frame: * Use FPV-SX-Upper-Frame V2.2 * Use FPV-SX-Base-Frame V2.2 * Use FPV-SX-Cam-Pod * Use FPV-SX-RollBar or FPV-SX-RollBar V2.2 And New, the half-moon feet! This setup is heavier, weighing 56 grams but is far more rigid. [BETA] : For those with older SuperX frame (arm and plate in one piece) I've made the V2.2 base frame with arms. But untested, please feel free to give some feedback.