Super Strong Machinist Vice

youmagine

The secret to this design's durability lies in the precision-cut steel plates that are carefully glued into place to distribute forces evenly. Take a look at the picture of the tin can I managed to crush with it - I've attached a printable layover sheet for the face plates so you can replicate my setup. One of the best features of this vice is its versatility: it can be used in reverse mode for clamping large objects from the inside out. The main lead screw also remains stationary as the slide moves, making it easier to access and maintain the mill handle underneath. INSTRUCTIONS: I printed all parts at 30% infill using ABS plastic. To assemble the vice, I used ABS glue to hold everything together. Painting this project was a labor-intensive process - I was trying to cover up the red ABS glue residue but ended up painting surfaces that would later need metal plates attached to them. On the bright side, using ABS glue and sandable primer helped me achieve a smooth finish. If you prefer plastic faces, I've included models for those as well. You won't need to print the 'face' parts if you opt for steel plates instead. To prevent warping on the base parts, make sure to take extra precautions - the bottom of these parts will be a working surface, and any warping could cause the slide to wobble during use. During final assembly, I threaded the nylock nuts onto the rod past the ends and used a hammer to mar up the threads on the outside. Then, I unscrewed the nylock nut until it got stuck on the marred end, effectively locking it in place. The vice mounts are designed for 5/16" bolts.