Super Nintendo Cartridge Insert and Dust Cover

prusaprinters

<p>This is for an insert for your Super Nintendo that allows you to easily play Super Famicom games without causing permanent damage to your console.</p> <p>Simply remove the screws to the original cartridge mold. And use this insert whenever playing Super Famicom games. This will help the games to get a good contact with the system every time.</p> <p>There is also a dust cover with the Super Famicom logo as well as one with the Nintendo logo.</p> <p>The attached GCODE is for the 3 piece set using PLA.</p> <h3>Print instructions</h3><p>Filament: PLA (Hatchbox White was used)<br/> Layer Height: 0.20mm (first layer) and 0.15mm remainder<br/> Infill: 15%<br/> Infill Design: Gyroid<br/> Top Fill Pattern: Rectilinear<br/> Rotated: 180 degrees on X axis (to eliminate needing supports)<br/> Supports: Not Needed<br/> Hardened Steel Nozzle: 225 (first layer) and 220 remainder<br/> Bed Temperature: 60 throughout<br/> Print Time: 62 hours 53 minutes (for the 3 piece bundle)</p> <p>Enabled:<br/> Extra parameters if needed<br/> Avoid crossing perimeters<br/> Detect Thin Walls</p>