Super Hooks! - A Modular Kitchen and Closet Hanging System

thingiverse

## Super Hooks! A customizable kitchen and closet hanging system. Mix and match any of the following: * Hook Type * Small Hanger (Perfect for holding spoons and spatulas) * Large Hanger (Ideal for hanging scissors) * Peg (Completely compatible with standard kitchen utensil hanging holes) * Also comes in a "short" version that's just as handy * End Type * Left End Cap * Right End Cap * Center Connector * Mounting Options * Standard Screw Hole * No Screw Hole at All It's highly recommended to have a screw hole every 3-5 segments to ensure the system stays together and doesn't come apart or twist during use (even when glued). Space the screw holes evenly, and try placing them on the ends whenever possible. ### Dimensions Each standard segment is a precise 90mm long, 30mm tall, and 6mm thick. Hanger pegs protrude by 44mm, while smaller hook pegs stick out approximately 21mm. ### Printing **Super Hooks were designed to print without supports!** *(Maximum overhang is -45° on 2-4 layers of the hanger pegs)* Recommended materials include ABS, PETG, PLA+/Pro PLA (any rigid and durable material) * Shells: 3+ * Top layer: 3+ * Bottom layer: 2+ * Infill: 25%+ (more for the pegs than the base) Print so that the pegs are pointing upward. If your slicer doesn't use Z-Up coordinates, you may need to adjust accordingly. ### Mounting Assemble the parts together, apply glue, and finish if desired. To secure the system, obtain #8 drywall screws - the holes were designed around these **Cobra TripleGrip 171R 51lb Drywall Anchors**:  Alternatively, you can use your own screws with the following specifications: * Screw diameter including threads: 4.3mm * Head diameter: 7.8mm * Head height: 3mm * Screw length: 20mm or longer (mine are 35mm)