Super glue replacement tip with cap

prusaprinters

<p>I use super glue all over my shop and the tips get clogged and I have to either unclog them or cut the tips lower and get a bigger hole. This was such a pain that I decided to sit down and 3D model a replacement tip and cap.</p> <p>The example photos are printed out of PETG white for the base and PLA black for the cap. You can use whatever you want but I liked the black and white and it was what I had loaded on my printers when I designed this.</p> <p>The tip does not need any supports but I recommend a raft for the cap. It fits perfectly when printed at .3mm layer height. The cap does snap on and I recommend using vaseline to keep the glue from sealing the bottle shut in time.</p> <p>Enjoy and let me know if you have any issues.</p> <h3>Print Settings</h3> <p><strong>Rafts:</strong></p> <p>Yes</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>.3</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>10%</p></div> <p><strong>Notes:</strong></p> <p>Only the cap needs a raft, its a small point and will fall over without one.</p> </p></p> Category: Parts