SUPER Chess

cults3d

SUPER Chess of 37x45cm. The design of the pieces is semi-abstract, The pieces are large in size. Ideal for printing with 100% infill. to obtain a good weight of each piece. It is portable, foldable and the pieces are clamped. ((( IT IS IMPORTANT TO TAKE THE PICTURES AS A GUIDE )))) For the squares on the board, you will need to print out 32 white boards and 32 black boards You have to glue them to the already assembled board and use them as a guide. the intersections of the 4 parts of the box (board) 1- print the tests to make sure that they hold the parts. _test_SChess_1 print both tests _test_SChess_2 prints the base of the part _test_SChess_3 prints the fastener 2a- print the 4 boxes to assemble the board 2b- (change the colors to improve the aesthetics) 3- print the squares and glue them on the box 4- print 2 long bolts and their nuts 5- print 4 short bolts and their nuts (when the box is assembled, it is recommended that you use glue for the bolts and nuts) 6- it is recommended to add glue to the handles of the case in the center of each handle so that the glue does not leak out. 7- print the parts and finish the project