SUP! SD card holder

thingiverse

This is a fantastic adjustable SD holder known as SUP! Although it's primarily designed for computer displays, its adjustable feature makes it versatile enough to fit other places up to 16mm thick and can store up to 7 SD cards. For instance, I use it with my display but also on my Prusa i3. The nut and bolt are designed separately for two key reasons. Firstly, so you can utilize different printing settings. Secondly, because this part can be tricky if your printer isn't well-tuned, so if you have issues printing the screw, you can use a standard M8 screw and nut instead. I printed all parts at once with varying settings thanks to Simplify 3D and my ZYYX+ 3D printer, but you can combine colors as you prefer. The head is printed with 0.2mm layer thickness and the rest with 0.1mm layer thickness. With my ZYYX+ 3D printer, I reduced extrusion multiplier to 0.9 for the nut and bolt and they work perfectly out of the plate. The design is intended to be combined with a custom wallpaper. I've uploaded an example but I'm not a graphic designer, as you can see ;), so I challenge you to design some wallpapers and post them here or on the project's webpage www.makitpro.com, UNLEASH YOUR CREATIVITY! Remember to upload pictures of your prints and... BE MINDFUL OF SUP, IT'S ALWAYS WATCHING YOU! Happy printing!, Makitpro Print Settings Printer: ZYYX+ 3D printer Resolution: 0.2mm Infill: 20% Notes: Rotate head to print standing. Rotate screw and nut to print flat.