sunshade awning rope guide Mk2
thingiverse
This is a redesign of https://www.thingiverse.com/thing:2907200 which worked OK, but has a limited life-time due to friction eating into the plastic. Therefore, I decided to redesign it using a wheel. The revised thing consists of 2 printed parts, the main unit and the wheel. Also, a 30 mm bolt, diameter 5 mm with locking nut and shims is needed. The 2 printed parts are printed together from the single STL. It is recommended to print with 100% infill for strength. The revised model causes the sunshade to be easier to lift, due to much reduced friction. This will also increase the lifetime of the rope. The part is designed for 2 screws 30 mm apart. The hole for the rope is 30 mm from the line through the screws.
With this file you will be able to print sunshade awning rope guide Mk2 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on sunshade awning rope guide Mk2.