Sunlu S8 SKR 1.3/1.4/1.4t MKS SGEN L V1.0/2.0 Conversion TFT35V3/E3/12864/Stock lcd

thingiverse

My Sunlu S8 SKR 1.3, 1.4, and 1.4 Turbo/MKS SGEN L V1.0 or V2.0 conversion kits for the TFT35 V3, TFT35 V3 E3, and 12864/Stock Sunlu LCDs. The motherboard plate works with all 5 boards, just pick the lid that matches your LCD configuration. You might need to flex your plates around a bit to have the screw holes SD/USB line up properly. I've tested this design on 8 machines. It always fits with a little tweaking. Just normal variances in construction from machine to machine. Make sure you squeeze it together when tightening to reduce any gaps between the lid and side panels. Parts should be oriented as they should be printed. No supports needed on any part. Use a 15-25mm brim for the main lid to reduce distortion in the upper areas of the 350mm print. Use 4 walls with a .4mm nozzle and .2/.25mm layers. 45-50mm/s is good for the first half, I'd drop to 35-40mm for the second, right before the LCD bridge. this will help with the upper half quality also. Lube your z-rods, any binding will make the lid shorter and wavy. Requires: 9x M3x6mm screws 5x M3 t-nuts or your preferred rail nuts If you find my parts helpful, please consider donating to continue my research and progress in my projects. Paypal: Mike.king.2590@Gmail.com Venmo: @Maikumizu Cashapp: $Maikumizu