Sunlu FilaDryer S1 filament dryer box PTFE fitting mounts (M10/M6)

prusaprinters

<p>Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing.</p> <p>Go full reverse-bowden (PTFE tube all the way to the extruder) to keep the filament path fully enclosed and away from humidity.</p> <p>These have built-in easy to remove custom supports, but the unsupported models are also included if you'd prefer to use your slicer's instead.</p> <p>Threads on the fittings I found were all M10-1 and M6-1 for reference, leftover from years of 3d printing experimentation ("failures") etc</p> <h3>Print instructions</h3><p>0.2mm layer height.<br/> Suggest PETG or ASA/ABS, since if you set the device to its max temperature of 55 to dry some other material <em>inside</em>, PLA would slowly melt.</p> <p>The built-in supports work better than generated and are much easier to remove but you'll need supports one way or another.</p> <p>The support is a thin ring around the thin area, which you can see, removed, at the bottom of one of the photos.</p> <p>Attached .gcode is the M10 version with built support, the M6 will be in the User prints tab.</p>