SUNLU DRIER CR-6 SE BRACKETS 1 or 2 SPOOLS

thingiverse

Single and Double bracket for the SUNLU FILADRIER S1 for the Creality CR-6 SE (will work on other printers that use the same top extrusion). You will need to route the filament through the sensor, I have moved mine up between the two rolls and have "patched" it into the direct drive and the driers themselves. On a standard CR-6 or bowden setup you can just run a tube to the filament sensor - leave plenty of slack and ensure smooth filament movement. I made a extension cable from an old USB cable that had broken plugs - just extend the existing wires each one at a time - keeping the order of the cables the same. I will update with photos as soon as I reprint the new and updated sizes. You will need at least one rail nut and matching bolt to fix this to the top frame. Upu can use this nut adapter I think https://www.thingiverse.com/thing:3050607 Print on flat side, no supports needed. Use 3+ walls for the double bracket to make sure it's sturdy.