'Sunlu' colosseum (Filament Painting)
prusaprinters
5 colour HueForge model. ‘Sunlu colosseum’ filament painting made using Sunlu pla+ filaments (as seen on sunlu website under hueforge filament packs) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA Sunlu PLA+ Black Transmission Distance: 0.6PLA Sunlu PLA+ Red Transmission Distance: 8PLA Sunlu PLA+ Orange Transmission Distance: 10PLA Sunlu PLA+ Pure Yellow Transmission Distance: 5PLA Sunlu PLA+ White Transmission Distance: 6Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to RedAt layer #10 (0.88mm) swap to OrangeAt layer #12 (1.04mm) swap to Pure YellowAt layer #13 (1.12mm) swap to White for the rest. This is a filament blending model, I would recommend trying to match the td as close as possible if not using the exact filaments to get the best resultsUse the exact numbers in your slicer to match up properly.model can be resized but keep the ‘Z’ height the same, designed to print with 0.4 nozzle
With this file you will be able to print 'Sunlu' colosseum (Filament Painting) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 'Sunlu' colosseum (Filament Painting).