Sunflower using Hueforge

prusaprinters

If you have no idea what Hueforge is look here You need something like black, then brown, then yellow, then white for this. I used a sort of dark red as the 2nd colour, worked ok. I used bambu studio and an X1C/AMS but you can use anything and change manually at the layers below.Layer height: 0.08First layer height: 0.16Swap Instructions:Black until layer #4 at 0.4mmsbrown until layer #8 at 0.72mmsyellow until layer #29 at 2.4mmsWhite until layer #58 at 4.72mms