Studio Series 86 Perceptor back filler

thingiverse

*Update 20220414: Uploaded the correct Part A piece. Accidentally uploaded the penultimate version which doesn't include clearance for the head crest while in alt mode. Also took the opportunity to make the decoration more defined.* A back filler piece to suit Studio Series 86 Perceptor. Part A can be used on its own with manual removal and installation, while Part B can be fit internally to mount Part A to the figure. Installation of Part B may require backing off the three screws which hold the torso together, and will clamp firmly in place using the internal ledges within the figure. A small notch is present on Part B to help fit the two pieces together. If you're feeling really keen a small pin may be used to hold the pieces together, instead of the printed cones. I would not recommend going much, if any larger than 1.5mm or 1/16". Tiny indents are present on the outsides of Part A to help guide a drill. NB Do not turn the head around when transforming with Part B fitted. There simply isn't enough clearance for the head crest. The entire face is covered by Part A anyway so it really isn't necessary. Part B requires supports to print successfully. Both parts are designed with very small clearances. Depending upon your printer and configuration you may need to sand or file some edges to get a good fit.