stuck fat santa

cults3d

this is a stuck fat Santa with a cool mechanism that lets you move the body up and down and lock it in place, so it looks like he’s stuck. The model is very easy to print no supports needed and prints in multicolor. this model is for personal use only, if you want to sell physical prints of my desings you need to subscribe to my patreon at: https://www.patreon.com/pressprint File: •The file contains several parts for multicolor printing. •You have to do a color change in Santa’s body to get the belt in black. •All the parts are printed without supports. •Minimum scale should be 100% (it took 3h36min for all the parts on my flsun super racer). •The clearances on this model are 0.4mm so any printer can print this, but at 100% scale you may have some difficulties assembling the boots, if so, reprint the boots at 100.2%. Mechanism: The mechanism is pretty simple, inside the chimney there’s slots that allows the body to go up and down, when the body reaches the top, you can rotate it a little bit to the left so you can lock it in place. (Check the gifs above) Assembly: •insert the white parts in the body. •insert the boots in place (you may need to glue them). •snap the snow in the top part of the chimney (chimney top: the one that has a hole in it). •put the body inside the chimney. •put the top part (snow+chimney top) on the chimney and glue it if needed. Note: before gluing the top part to the chimney please make sure that the body goes up and down and it rotates properly. short assembly video: (https://youtube.com/shorts/p0_6BGtDqw8?feature=share) Happy printing.