Stronger Z -Prusa i3 Rework

thingiverse

I've developed a solution based on various components I've encountered here. Since the electronic box was not compatible with other elements, I had to design a workaround. The LCD display (128x64) is integrated into this system and positioned at the back of the plexiglass panel, which allowed me to allocate space for tall prints. The upper section is made from 10mm material. You have two options: 1. Print only the following components: Lower Part, 10mm, and Nut (2 each). 2. Print a complete set that includes Lower Parts, Nuts (4), and all other necessary parts to make it LCD compatible. **Print Settings** Printer Brand: RepRap Printer: PRUSA I3 Rework Perso Rafts: No Supports: No Resolution: 0.3 mm Infill: 30% honeycomb pattern Notes: Print these parts under optimal conditions for best results, and don't forget to add support structures for the smaller top part. **Post-Printing Requirements** You will need: * 2 x M4 x20 mm countersunk head screws and matching M4 nuts * 8 M10 nuts * 8 M10 washers * 1 x 10 mm threaded rod (350mm length), 2 x (320mm lengths) First, attach the part named "Nut" to one of the 350mm rods using glue. Then, replace the other rod and assemble everything. Easy as can be!