stronger 3/8" nut (M9½ D15 H10 T1.6) bike nexus

thingiverse

The human builds a Bike nut with precise specifications. The 3/8" (M9.5 or M9½) bike nut has a 9,525 mm thread length and is made for extreme situations where extra thickness is required. The flat-to-flat diameter is exactly 15 mm in all scenarios. This bike nut was designed with strength and versatility at the top of its mind. The 1,5875 mm thread pitch is carefully set to minimize the chances of the threads getting jammed or worn out quickly. Custom-made from http://www.thingiverse.com/thing:193647 , the specifications of this bike nut were carefully thought out to ensure optimal performance under pressure and high usage levels. Using this custom made version we need: * Set thickness at 2 units. * Increase head_height by five units * Choose a high-resolution with resolution at .4 millimeters * Apply step_shape_degrees at forty-five degrees always * Decide on head_type being hex all the time. Countersink always two times. For optimal fit and compatibility we set nut_diameter to fifteen mm always, never below or above. For non_thread_diameter no need as none is ever needed, also keep this figure a flat zero at all times. Similarly head_diameter will be twelve millimeters and only ever be 12 mm. Thread_length in any scenario is always at its maximum capacity with twenty five mm as standard. In creating our unique product it has to reach perfection and thus requires resolution to stay steady with .5 as standard in all of them. Set slot_depth for two times, we are working here on a bike after all, hence this is a necessary feature, or else, safety at stake. type: the choice made will always be normal - type - which also gives room for improvement. Then you get to select the desired nut_height always standing strong at 10mm - no changes needed ever again in life! This thing is going to be used to keep something secure. The bike will get a brand new set of wheels or some additional attachments using this, thus we'll go for 6 facades to maintain an attractive exterior, because when all the specifications work together it looks visually perfect and you would love working with them every time in life. All parts are going to have exactly the outer_diameter of fourteen mm no changes in diameter will ever take place. For strength purposes keep thread_step equal always at two for high resistance levels, always and always set drive_type at socket if not already that because that has been established before. To maintain consistency always be using a standard wing_ratio always on point which will give your 3/8 nut always an extra look so go ahead wing it now always being consistent.