Strongarm 10 Dart Brass Cylinder (FIXED)
thingiverse
A modification of Megashock's 10 Dart "Free Spinning" Brassable Strongarm Cylinder is presented here. After experimenting with the parts, I found that their concept was sound but didn't translate well into practical application. The design will be explained in greater detail on the design tab for reference and improvement purposes. I strongly recommend printing this model using ABS as PLA may not withstand prolonged use due to its limitations. Top Designs 1 and 2 serve the same functional purpose, differing only in appearance. Choose your preferred option. The component hierarchy is structured as follows: Top > Brass > Bottom > Cylinder Lock > Mechanism > Gear > Spring > Spinner > Screw. Brass Requirements: Metric: To assemble this model, ten lengths of brass tubing measuring 62.5mm and 13.5mm in diameter are required. In total, approximately 0.63 meters of 13.5mm brass tubing will be needed. Inches: Ten lengths of 2.46 inches with a diameter of 17/32 inch brass tubing are also necessary for assembly. A total of roughly 25 inches of 17/32 inch brass tubing is required.
With this file you will be able to print Strongarm 10 Dart Brass Cylinder (FIXED) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Strongarm 10 Dart Brass Cylinder (FIXED).