Stromberg Carburetor Tool S-353
thingiverse
Stromberg Carburetor Tool S-353 I saw this... https://www.mgexp.com/forum/mg-midget-forum.3/make-your-own-zenith-stromberg-carburetor.2165252/#msg-21252 So I made this. You will have to drill a small hole for a 1/16" pin to lock into the notch on the carburetor damper piston cylinder. My pin was a cut off section of finishing nail. I was able to use some CA glue to secure the pin. One pin to interlock is enough. The Allen wrench is 1/8" and the hole down the center will most likely have to be drilled out to allow the Allen wrench to spin freely. Harbor Freight carries a kit with an 1/8" Allen that is long enough for around $7 USD I printed using ABS 100% infill and it takes about 1.25 hours to print.
With this file you will be able to print Stromberg Carburetor Tool S-353 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Stromberg Carburetor Tool S-353.