Stribog Parts

thingiverse

#Open Source Source files are included so that individuals can make modifications as they please. #Post-processing The hole for the roll pin on the lower that holds the spring retainer in place will most likely need to be filed a bit. The top of the lower might also need to be slightly sanded for the back pin to fit in, I double checked the dimensions and they were accurate, but the back pin has some issues fitting so I'd also file that hole a little. #Modifications This is a proof of concept for the bolt release design so keep that in mind if you plan to use the default files. All I ask is that if you make improvements to the bolt release that you upload the source files so the rest of us can use / improve upon it. :) **Software Used:** Autodesk Fusion 360 **Recommended Filament:** PLA / PLA+ **Printer Settings:** - 100% infill - Print with Supports (No Raft or Skirt should be necessary however I have a heated bed and use glue stick) - No Supports are needed for all circular holes on the walls of the lower, this includes that small hole in the mag release area, keep supports for the rest of it though. (You might be able to get away with no supports for that whole area, but I haven't tried, so do so at your own risk) - No Supports are needed for the square hole in the grip (This hole is for a nut so you have something to thread your grip into) - No Supports are needed for the flared magwell **Orientation** - Print the lower upside down since that will give you more surface area while still maintaining a clean print.