Streamdeck Mount for Fanatec CSW 2.5

thingiverse

After many trial and errors, I finally succeeded to create a proper free Streamdeck mount for the simracing community. The Streamdeck will fit like a glove into the cutout, so please do not use any offsets or increasing size in Cura. The thickness of the plate is 5 mm, which I found to be perfect, with minimal flex. I will suggest that you use my settings in Cura (see the pictures), except printing temp., which depends on your filament. For mounting, you will need the following: - 4 countersunk 4.0x20 mm screws (for mounting the Streamdeck to the plate). - 2 M6x20 bolts (DIN 912) (for mounting the plate to the wheelbase - the original M6x15 bolts are too short). You may notice that the cutout for the power button on the wheelbase is a bit off, but have corrected it (didn't want to wait another 12 hours just for that). Your print should be just fine. Feel free to ask any questions. Also check my print settings further down. If you want to buy me a beer for my effort, you can do it here: https://www.buymeacoffee.com/abolsen