Strap for Prusa Face Shield V2

prusaprinters

<p>Strap for Prusa Face Shield V2:<br/> Stronger and simpler that my original design.</p> <p>Features:</p> <ul> <li>Compatible with the Prusa face Shield RC1 - RC2 - RC3</li> <li>Designed for TPU with about 98A shore value.</li> <li>Fits on 245 mm Prusa MK3 bed.</li> <li>Can fit 8 on a single print.</li> <li>One size fits most.</li> <li>Comfortable on the back of the head.</li> <li>You can change the "springiness" by scaling thickness in your slicer to accommodate for the durometer of your TPU.</li> <li>You can also affect the elongation capacity by increasing the scale in the Y axis direction (taller = more elongation)</li> </ul> <p>This is not a "remix" but the idea came from "Mark PP":<br/> <a href="https://www.thingiverse.com/thing:4253074">https://www.thingiverse.com/thing:4253074</a><br/> Thanks.</p> <h3>Print instructions</h3><p>This is very easy to print.<br/> I tested the design with Fillamentum TPU FLEX 98A, and with Priline TPU with good results.</p> <p>The Gcode provided here is optimized for Fillamentum TPU FLEX 98A.</p>