Storz & Bickel Mighty Vape Dosing Capsule Filler

thingiverse

This makes filling 8 Storz & Bickel dosing capsules hassle free, mess free and super easy. Place 8 dosing capsules in the holder that came with the vape, and put the filler guide on top. It will slot into the centre hole which ensures correct alignment over the capsules. Pour in your herb and rotate the arm to spread it out evenly across all capsules. Slide the tapper onto the end of the brush that came with the vape, and gently tap the herb down into each capsule, using the brush to sweep in any stray bits of herb. Tap a bit more, then remove the guide. I printed the parts at 0.20mm, standard PLA. No supports required, infill can be set to anything. You will need to glue the base into the guide at the bottom, there is a small square hole to ensure correct alignment with the dosing capsules. Be sure everything fits together and it rests properly on the capsules before gluing. Done properly and you should have really good alignment over the capsules. The swinging arm just slots into place with a little pressure. . The tapper slides onto the handle of the brush that came with the Mighty Vape. UPDATE: 29 Dec 22 I forgot to upload the tapped (called Jake Tapper), and I've uploaded a version 2 of the main filler bowl. I found that the swinging arm thing really isn't needed. You can just pour your material into the bowl and spread it around with the brush, then tap it down. Also new is the Canister Shaper. I ordered a box of spare canisters from Storz & Bickel, and several were a bit bent out of shape. So I made this so I could slip the canister over the end (the end with a hole in it) to reshape it, and then slip the canister lid over the other end, which is ever so slightly larger. Using this, you should be able to make dented canisters round again.