Stolas Grimoire Seal Helluva Boss

thingiverse

When the new merchdrop from Helluva Boss came, I was eager to get one of the Limited stock grimoire seal pins. However I sadly was to slow and thus not able to obtain one. But that might just play out for you, dear reader! Since I modeled this printable (though comparably huge, apr. two times the size) version of it that you can simply make at home! Building instructions: Making this is rather easy, you simply need a normal 3d Printer (no dual extrusion or dual color on) and your favorite two colors of Filament (I used black and white thus the names of the STLs)! The STLs are already correctly oriented and dont need to be repositioned or anything alike. If you however for any reason want/need to adjust the position, adjust the position the same for BOTH parts! Furthermore, the Seal is designed to be printed at a layerhight of 0.2mm and with a standard 0.4mm nozzle. And without any kind of Support structure. The amount of Infill, as far as I am concerned, does not matter. 1. Choose the color for the foreground of the Seal (I used white filament) and print the STL called: Sygil White Part. Make sure your slicer slices it to exactly ONE layer hight! 2. After the print is done (should just take a couple min) keep the printer heating and change th Filament to the second color (I used Black). After that get it ready for the next print but leave the first part of the Seal on the Printbed and make sure to not move the Printbed. As soon as you are ready start the Printing of either the STL Sygil Black Part for a coin like thing, or Sygil Black v3 for a coin with eyelets to sew it onto stuff. 3. After this print is done, you can take everything of the printbed and it should be one part. Enjoy!