Stick Tripod

thingiverse

Foldable Tripod Stand for Camera, Antenna, Light, Direction Sign Etc. Made from 3D Printed PET Joints and Wooden Sticks The stand is designed to be portable and versatile, with various configurations possible by changing joint size, stick diameter, and length. The joints are made of 3D printed PET material, while the sticks are wooden. List of Components: - M4 retaining nut (12 pieces) - M4 L40 PH screw (12 pieces) - Leg stick 78 cm (3 pieces) - Arm stick 18 cm (3 pieces) - Central stick XX cm (1 piece) - Extension stick 100 cm (3 pieces) - M4_D15_slider (1 piece) - M4_D15_central (1 piece) - M4_D15_hinge_on_out (3 pieces) - M4_D15_hinge_end_in (12 pieces) - D15_RD6_guy_line_ring_pipe_joint (3 pieces) - RD6_line_tensioner (9 pieces) - Nail (3 pieces) - Tent peg (9 pieces) - Lower guy line 2.2 m (3 pieces) - Middle guy line 3.6 m (3 pieces) - Upper guy line 5.0 m (3 pieces) - Top guy line 6.4 m (3 pieces) Design and Manufacturing Notes: The sticks are designed to be cut on a laser cutter, with a power setting of 100 and a speed of 0.5. The central stick length is chosen to meet the folded tripod and extensions length for easy packing. Lines: - Length calculated to lay 45° to the ground + 40 cm tension loop + 10 cm tensioner hitch + 20 stick hitch 3D Printing Notes: The stand requires a significant amount of PET-G filament, with a total of 215 meters needed. The 3D printing process takes approximately 72 hours for each model. Models: - Model 01: Tower - leg pads with peg hole to nail tripod to the ground outdoors - Model 02: Dwarf (short&strong) - D15.4 components Note: The above design and manufacturing notes are based on the provided information and may require adjustments or modifications to ensure proper functionality and safety of the product.