Stepcraft Staub Absaugung Dust Extractor Kress

thingiverse

I've found several suction adapters here, but they all have a too low flow rate, so I'm sharing my version instead. The "Blech.stl" is cut from a 2mm aluminum plate, as the name suggests. Alternatively, a printed plate should also provide sufficient stability. The outer diameter of the hose connection is 33.5mm and the inner diameter is 30.5mm. The layer height is 0.3mm, support is enabled, and the filament used is Innofill ABS orange. I made changes to the lower part on April 7th, 2017, at 21:40, which included a thicker brush holder. On April 13th, 2017, I fixed an error in "Saugadapter.stl" due to incorrect drilling positions. On December 23rd, 2017, I adjusted the suction adapter and brushes.